OE Level All Systems Diagnostic free for life for all cars

THINKDIAG Mini obd2 scanner diagnostic tool is an universal automotive diagnostic scanner which can access to all available car systems such as Engine, Trans, Brake, TPMS, Battery, SRS etc. to read and clear codes. In addition, it displays real-time data (sensors, valves, RPM, etc.) in text, graphical and analog formats and saves them as reports with the customer.

Some commonly used systems as follows:

Check Engine System: THINKDIAG mini Bluetooth diagnostic tool will read the fault codes, find the cause of the check engine light and point out the problems. This car scanner can show you the live data stream in a graph.
Diagnose ABS System: THINKDIAG mini scanner checks all ABS to retrieve DTCs, views the live data, and offers you specific info of pending codes
Read SRS System: This code scanner reads the SRS information, detects existing problems to prompt a certain replacement or repair in time to ensure driving safety.
Transmission System: This car Bluetooth diagnostic tool reads diagnostic codes from the transmission system and detects whether the car’s speed and load match its transmission’s power output.

All Cars Full OBD2 Functions

*-Read extensive current, pending and permanent codes in OBD system quickly
*-Clear detected fault codes and turn off the Check Engine Light efficiently
*-View graphical live data of vehicle's computer module(s) for easy analyses
*-View the vehicle's operating parameters at the moment a DTC is detected
*-Read I/M readiness status to have a vehicle inspected for state emissions compliance
*-Perform O2 sensor test to check fuel efficiency and vehicle emissions
*-Read the results of on-board diagnostic monitoring tests for specific components/systems
*-Retrieve the vehicle information of VIN, CINs, and CVNs completely
*-Perform the component Test by allowing initiating a leak test for the vehicle's EVAP system

Pass Emission Test Smoothly
With this scan tool, you don’t have to drive around endlessly, continuously coming back to the repair shop for the retest.
You can do a quick check of the vehicle, to determine if it is ready to pass the emission test.
I/M Readiness
Check the readiness of the monitoring system. It is an excellent function to use prior to having a vehicle inspected for compliance to a state emissions program.
O2 Sensor Test
Retrieve O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
On-Board Monitor
View the results of On-Board Monitor tests. The tests are useful after servicing or after erasing a vehicle’s control module memory.On-Board MonitorView the results of On-Board Monitor tests. The tests are useful after servicing or after erasing a vehicle’s control module memory.
Get Effective Diagnostic Result
Your repair work can be done in a short time by using THINKOBD as follows
Vehicle Information
Display the vehicle identification number (VIN), the calibration identification (CIN), and the calibration verification number (CVN), and other information of the test vehicle.
EVAP Test
Mode $08 command tells your car to start a test of the “evaporative emission control system”, to prevent fuel from evaporating out of your tank and contributing to smog.
By this way, you can verify your fix right away, without waiting a few days (or longer) for your car to run it automatically.
Freeze Frame Data
Snapshot the precise conditions of the car when a fault code triggers the check engine light, to help identify the problem.
Live Data Stream
Display the real time PID data from ECU (as analog inputs and outputs, digital inputs and outputs, and system status information broadcast on the vehicle data stream)
The live data produced is accurate and tells you exactly what you require to know about your vehicle.
DTC Lookup Support
Reset Check Engine Light

Support 99% Vehicle, 1000+ Vehicles

THINKDIAG mini is compatible with most American, European, and Asian models manufactured as from 1996. It supports all OBDII protocols: KWP2000, ISO9141, J1850 VPW, J1850 PWM and CAN (Controller Area Network). If you don't know your car OBD2 protocols that you could check your car OBD2 connector whether 16 Pin. If yes. This goods support to your car.

1.American Car list:
Need standard obd2 and release year from 1996-now
Chrysler, Ford, GM, Jeep, Lincoln, Buick, Cadillac, Chevrolet, Dodge, HM, ect…

2.European car list:
Need standard obd2 and release year from 2000-now
Mercedes Benz, Smart, Sprinter, BMW, Volkswagen, Skoda, Audi, Opel, Lamborghini, Porsche, Maybach, Ford, Land Rover, Jaguar, Aston Martin, Bentley, Rolls-Royce, Rover, Mini, Vauxhall, DR, Ferrari, Fiat, Abarth, Lancia, Alfa Romeo, Maserati, Bugatti, Peugeot, Citroen, Renault, Saab, Volvo, GM, GMSA, Dacia ,Seat, ect …

4. Japanese / Korean car list:
Need standard obd2 and release year from 2008-now
Honda, Acura, Toyota, Scion, Lexus, Mazda, Nissan, Infiniti, Isuzu, Daihatsu, Suzuki, Mitsubishi, Subaru, Samsung, Daewoo, Hyundai , Kia, ect …

5. Chinese car list:
Need standard obd2 , and release year from 2014 -now
Great Wall, Huachen, DF Honda ,Lifan, ect …

Note:Before place order please check compatibility first. send your car brand model and release year to seller.

for example(Audi,A3, 2020)

Support 12 Languages

English,French,German,Spanish,Italian,Portuguese,Japanese, Russian,Polish,Traditional Chinese, Turkish, Greek

Details

How to Use the THINKDIAG mini?

Step1: Download the "ThinkDiag" in the APP store or in GooglePlay store.
Step2: Open the THINKDIAD APP, click on"Sign Up",verification code will be sent to the email you input, if you did not got, please check the spam.
Step3: Click on "Activate" to open the activation page, you need to input the serial number and an 8-diagit activation code is on the first page of the Quick Start Guide.
Step4: Plug THINKDIAG mini into the vehicle's OBDII port, there will be a red light which indicates the device is powered on.
Step5: Open the THINKDIAG APP, it will automatically search for activated devices, select your device and connect to it via Bluetooth in the APP. The indicator will turn to flashing blue.
Step6: In the "Diagnostics" interface of the App, you will need to download the corresponding diagnostics software when first apply"All System Diagnostic"and"OBD Functions".

Other Functions

Auto VIN
One-click Diagnose
4 In 1 Live Data Stream
Print Diagnostic Report
Online Feedback

Package contents

1 * Thinkdiag Mini Scanner
1 * Multilingual User Manual

Q&A: Frequently asked questions and answers

Q:Why is there no power with the VCl after connecting it to the vehicle's DLC port?
A: Please check whether the VCI is securely connected and verify that the vehicle's ignition switch is turned ON.

Q:Why can't l access the vehicle ECU system?
A:Please check whether the vehicle is equipped with the system, whether the VC1 is correctly connected, and whether the vehicle ignition switch is ON.

Q: Why does the system stop while reading the data stream?
A:This may be caused by loose connection.Please unplug the VCl and try again.